Serial MCP demonstrates solid fundamentals with 15 well-named tools and consistent schema coverage. All tools have descriptions and input schemas with typed parameters. However, the server has notable gaps in output documentation, error handling guidance, and parameter constraint clarity that prevent it from reaching 70+. Parameter descriptions often lack format/range constraints needed for LLM disambiguation. Output schemas are not explicitly documented in the tool definitions. Error handling is present in the implementation but not surfaced in tool descriptions to guide agent recovery.
List all available serial ports on the system, optionally filtered by port name or vid:pid.
Close an open serial port session and clean up resources.
Close all open serial sessions.
Send a command on an already-open serial session and read the response.
Detect the baud rate of a serial device by sending a probe sequence and analyzing the response timing.
Execute a command on a serial device with automatic session management. Opens the port, executes the command, reads the response, and closes the port in a single atomic operation.
Open a serial port and initialize a session for communication.
Parameter descriptions lack format constraints and ranges. E.g., baud_rate is described only as 'Baud rate in bits per second' with no mention of valid values (common: 9600, 19200, 115200, etc.). timeout parameters have no min/max bounds. This forces LLMs to guess reasonable values.
Output schemas are not documented in tool definitions. While the implementation has _finalize_text_result() and _limit_text_result() methods, tool descriptions do not specify what fields are returned (e.g., serial_read returns data, byte_count, timestamp, matched, undocumented). LLMs cannot plan downstream tool calls without knowing response structure.
| Scored | Grade | Overall | Spec posture | Rubric |
|---|---|---|---|---|
| 2026-09-23 | C | 64 | 2026-07-28+ | v2 |
Read unread data from a session's buffer, advancing the read cursor.
Read unread data from a session's buffer as hex string (for binary protocols), advancing the read cursor.
Read historical data from a session's buffer since a given timestamp (non-destructive, does not advance read cursor).
Get the status of all open serial sessions.
Wait for a regex pattern to appear in incoming data on an open session.
Write data to an open serial session without reading a response.
Receive a file from a serial device using XMODEM protocol.
Send a file to a serial device using XMODEM protocol.
Error handling guidance is absent from descriptions. serial_open may fail if the port is busy or doesn't exist, serial_command may timeout, serial_detect_baud may find no matching baud rate, but descriptions don't mention error conditions or recovery steps. Agents cannot self-correct.
Mutual parameter exclusivity not documented. serial_execute and serial_command both accept 'data' and 'data_hex', but descriptions don't state these are mutually exclusive. Same for 'respond' and 'respond_hex'. Agents may pass both, triggering validation errors.
Stateful session management not surfaced in tool instructions. serial_open returns a session_id, but the mcp.instructions (in FastMCP constructor) mention session lifecycle, however, agents cannot reliably map which port name = session_id without explicit guidance in each tool's description.
Encoding parameter poorly documented. serial_read, serial_command, serial_wait_for accept 'encoding' with default 'utf-8', but description doesn't mention what encodings are supported (e.g., utf-8, latin-1, ascii only?) or what happens when the device sends non-UTF-8 data.
Regex pattern validation absent. serial_command and serial_wait_for accept 'pattern' and 'expect' parameters (regex), but descriptions don't warn about invalid regex syntax or timeout behavior if pattern never matches. Agents could pass malformed regex and get hung.